ChainSaw Sharpening Wheel
Ctoolmake offering a wide range of Diamond Grinding Wheels and CBN Grinding wheels, to sharp the Chain Saw It is very import to choose the correct wheel. Our wheels will work on any of the following and many other grinders such as: Oregon, Stihl, Tecomec, Timbertuff, Jolly, Maxx, Franzen, Foley, Northern, Maxx, SIlvey, Franzen and others.
Which wheel to choose: diamond or CBN. If you are sharpening steel chain - CBN wheel is the correct choice. If you are sharpening carbide tipped chain - you should choose diamond wheel. Wheel is profiled to match chainsaw teeth. Used correctly lasts very long and gives superior finish. Please have in mind, you cannot use CBN wheel on carbide tipped chain. Never use diamond wheel on steel chain as well.
There are two main pitches which are used for chain saws: 1/4, .325, 3/8 Picco, 3/8, .404. The common Grinding Wheels would be as below:
- Wheel shape: For chain saw grinding;
Outside diameter: 4 1/8" or 104,78 mm
Abrasive layer thickness: 1/4" or 6,35 mm
Bore diameter: 7/8" or 22,23 mm
- Wheel shape: For Chain saw grinding;
Outside diameter: 5 3/4" or 145 mm
Abrasive layer thickness: 3/16" ,1/4",1/8" 4.7/3.2 or 6,35 mm
Bore diameter: 7/8" or 22,23 mm
- Wheel shape: For Chain saw grinding;
Outside diameter: 8 " or 203mm
Abrasive layer thickness: 3/16",1/4",1/8" 4.7/3.2 or 6,35 mm
Bore diameter: 1" or 25.40 mm
If you need any chain saw sharpening wheel, contact us without thinking.